MIG-MAG SYNERGIC WELDING MACHINE.art641 evo350tc synergic mig mag evo synergic 1

Art.641SpecificationsS CE

230-400V 50/60 Hz
± 10%

Three phase input


40 A 25 A
(230V) (400V)

Fuse rating (slow blow)


15,9 KVA 40%
10,7 KVA 60%
7,6 KVA 100%

Input power


35A ÷ 400A

Min.-max. current that can be obtained in welding


350A 40%
290A 60%

220A 100%

Duty Cycle (10 min.40°C)
According to IEC 60974.1



Number of regulation steps


0,6/0,8/0,9/1,0/1,2 Fe
0,6/0,8/0,9/1,0/1,2 Al
0,6/0,8/0,9/1,0/1,2 Inox
0,9 Cu-Si 3%

Wire size that can be used


Ø 300 mm / 15 Kg

Max. wire spool size


IP 21 S

Protection class


95 Kg




Dimensions mm

The EVO synergic range is the result of product engineering that foresees not only a "product family look" but, mainly, a standardization of strategic components such as, for example, the control circuit, which is only one for all the models of the EVO range.
The EVO synergic range is made up of one single-phase power source EVO 200M synergic COMBI (Art. 622) and two three-phase power sources EVO 200T synergic (Art. 627) and EVO 350TC synergic (Art. 641) from 230A to 400A. The power source Art. 622 may also work with flux-cored wire.
The power sources are fitted with aluminium wire feeder (4 rollers model EVO 350TC synergic) and 12 welding current positions (16 positions model EVO 350TC synergic)
They have an adequate range of synergic curves in memory, and are especially recommended for MIG brazing of galvanized sheet metal and high-strength steels.
Using the power source with the Cebora 2003 Push-Pull system torch makes the EVO SYNERGIC power sources also suitable for welding aluminium: connecting the Cebora 2003 Push-Pull system torch activates the specific synergic programs that Cebora has created for aluminium wires starting at a gauge of Ø 0.6.
The microprocessor used in the new control circuit makes it possible to upgrade, even over a long period, the synergic programs stored in the machine by means of the optional kit art. 136.
Three different types of torches may be used: Standard MIG, Push Pull 2003, and Spool Gun (only the manual function is active with the Spool Gun).
The EVO synergic power sources are suitable for use in the automotive and for light/medium metal fabrication.
Complies with EN 61000-3-12.