INVERTER PLASMA CUTTING POWER SOURCE. HIGH FREQUENCY IGNITION.

Art.	279	Specifications
	115/230V 50/60 Hz + 15% / -20%	Single phase input
	32 A 16A (115 V) (230 V)	Fuse rating (slow blow)
	3,5 KVA 40% 2,8 KVA 60% 2,4 KVA 100%	Input power
	5A ÷ 30A	Current adjustment range
	30A 35% 25A 60% 22A 100%	Duty Cycle (10 min.40°C) According to IEC 60974.1
	ELECTRONIC	Stepless regulation
	8-12 (15) mm 1/3”-1/2” (5/8”)	Thickness on steel: Recommended- Max.-(Severance)
	4m (13 ft.)	Torch length
	60 lt/min - 3,5 bar	Air consumption
	IP 23 S	Protection class
	13 Kg	Weight
	175x503x400H	Dimensions mm

POWER PLASMA 3035/M was created to meet the need of working in the body shop with an easy to handle, easy to use power source with minimal system requirements yet able to ensure excellent quality cutting on all metals, including the new high-strength steels.
POWER PLASMA 3035/M weights just 13 kg including the torch, and requires single-phase power supply; it works with compressed air or nitrogen (for high-quality cutting), provided at a pressure of 3.5 bar, with an air flow of just 60 l/min (and may thus be powered by a 25-l compressor).
The recommended thickness, for the best cutting quality and productivity, is 8 mm; the maximum thickness is 12 mm and the severance thickness is 15 mm.

- Automatic voltage change (115/230 V +15% / -20%).

- Pilot arc operating mode, which makes it possible to work even on painted or coated metals.

- Pilot self-restart, selectable from the panel, to interrupt and automatically reset the arc when cutting screens and grids, increasing operator productivity.

- Nozzle holder protection, as required by standards IEC 60974-7, which eliminates the risk to the operator of direct accidental contact with the gas nozzle.

- High voltage arc striking with high frequency, to ensure reliable lighting of the pilot arc and reduced disturbances.

- High electromagnetic compatibility, per IEC 60974-10, allowing the power source to be used in the vicinity of electronic equipment (such as computers, PLC, etc.).

- Explosion-proof protection of the air reducer unit.

The power source is particularly suitable for cutting the overlapped sheets that are commonly used in the car bodies 
The compliance with EN 61000-3-12 brings substantial energy saving and a wide supply voltage tolerance (+15% / -20%).
The power source can also be powered by motor-driven generators of adequate power (min. 6KVA).

Dokumentacija: 

https://www.cebora.it/art_279_presentazione_prod_uk.html

INVERTER MULTI-VOLTAGE PLASMA CUTTING POWER SOURCE. “ON AIR” IGNITION.

Art.	337		Specifications
	208-220-230V  50/60 Hz ± 10%	400-440V  50/60 Hz ± 10%	Three phase input
	50 A	32 A	Fuse rating (slow blow)
	16,6 KVA 100%	22 KVA 100%	Input power
	20A ÷ 130A	20A ÷ 130A	Current adjustment range
	130A 50% 125A 60% 105A 100%	130A 80% 125A 100%	Duty Cycle (10 min.40°C) According to IEC 60974.1
	ELECTRONIC		Stepless regulation
	40-50-(60) mm 1”37/64”-1”31/32” (2”-3/8”)		Thickness on steel: Recommended- Max.-(Severance)
	6m (20 ft.)		Torch length
	250 lt/min - 5,5 bar		Air consumption
	IP 23 S		Protection class
	40 Kg		Weight
	297x613x558H		Dimensions mm

The PLASMA SOUND PC 130/Tthree-phase power source for plasma cutting of metals represents the upward evolution of the 10051/T.
Thanks to the new aircooled CP 162C torch, the recommended thickness, for the best cutting quality and productivity, is 40 mm; the maximum thickness is 50 mm and the severance thickness is 60 mm.
The duty cycle (125A@100% and 130A@80%) and the cutting speed make the PLASMA SOUND PC 130/T ideal for automatic production applications, as well as for manual productions.

Main features of this model:

- Simple control panel with LCD display

- Synergic parameters settings

- “Pilot self-restart” function selectable from the panel, which interrupts and automatically restarts the arc when cutting nets and grids, increasing operator productivity.

- Consumables worn out automatic detection

- Central torch adapter with safety protection, to avoid accidental contact with the power parts.

- “Post-gas” function which, by cooling the torch after arc shut-off, reduces stress on the components and extends the life-span of consumables.

- Suitable for gouging

- High electromagnetic compatibility, per IEC 60974-10, allowing the power source to be used in the vicinity of electronic equipment (such as computers, PLC, etc).

- Automatic detection of phase presence (both upon start-up and during operation), to avoid damaging the machine in case the phase is accidentally missing.

- Automatic voltage change between 208/220/230V and between 400/440 V.

- Standard equipped with 6 m CP162C MAR torch with "on air" ignition (no high frequency)

- The power source can also be powered by motor-driven generators of adequate power

- Spot marking function for extremely accurate indentation marking

The compliance with EN 61000 - 3 - 12 brings substantial energy saving and a wide supply voltage tolerance.

Dokumentacija:

https://www.cebora.it/art_337_presentazione_prod_uk.html