INVERTER MMA AND DC TIG WELDING POWER SOURCE. HF IGNITION.

Art.	264		Specifications
	TIG	MMA
	230V 50/60 Hz + 15% / -20%		Single phase input
	16 A		Fuse rating (slow blow)
	4    KVA 35% 2,7 KVA 60% 2,2 KVA 100%	4,6 KVA 30% 3,5 KVA 60% 2,8 KVA 100%	Input power
	5A ÷ 180A	10A ÷ 140A	Current adjustment range
	180A 35% 135A 60% 110A 100%	140A 30% 115A 60% 95A 100%	Duty Cycle (10 min.40°C) According to IEC 60974.1
	IP 23 S		Protection class
	10,3 Kg		Weight
	171x420x340H		Dimensions mm

WIN TIG DC 180 M (art. 551) is a single-phase inverter power source (180A 35%), suitable for TIG and MMA/-SMAW welding, with the exception of AWS6010 cellulosic electrodes; mainly designed on purpose for maintenance and repair works, as well as small production batches.

The welding machine is characterized by a black-colored casing (Special black edition).

The welding current can be adjusted from 5 to 180A and two potentiometers allow respectively the slope down and the post-gas function adjustment.

In TIG mode, the arc is started either on high frequency or by contact through the Cebora lift-system.
It features a 2 stage/4 stage selection key.

It is set up for remote control via foot control (art. 193), standard remote control (art.187+1192) or updown control on the torch (art. 1262).

The protection gases to be used are argon, argon/helium, argon/hydrogen.

It is also possible to memorize up to 9 welding programs (JOB).

Compliance with EN 61000-3-12 ensures a significant reduction in energy consumption and a wide tolerance on supply voltage (+15%/ -20%).

The power source can be powered by adequately powered motor-generators (Min. 8 KVA).

Dokumentacija:

https://www.cebora.it/art_551_presentazione_prod_uk.html

CIJENA: 7.550,00 Kn + PDV

 INVERTER MULTIVOLTAGE MMA AND PULSE DC TIG WELDING POWER SOURCE. HF IGNITION.

Art.	553				Specifications
	TIG		MMA
	230V  50/60 Hz +15% / -20%	115V  50/60 Hz +15% / -20%	230V  50/60 Hz +15% / -20%	115V  50/60 Hz +15% / -20%	Single phase input
	16 A	25 A	16 A	25 A	Fuse rating (slow blow)
	5,3 KVA 30% 3,2 KVA 60% 2,7 KVA 100%	3,8 KVA 40% 3,1 KVA 60% 2,2 KVA 100%	4,5 KVA 35% 3,8 KVA 60% 3,4 KVA 100%	3,6 KVA 35% 2,8 KVA 60% 2,3 KVA 100%	Input power
	5A ÷ 220A	5A ÷ 160A	10A ÷ 140A	10A ÷ 110A	Current adjustment range
	220A 30% 160A 60% 140A 100%	160A 40% 140A 60% 110A 100%	140A 35% 125A 60% 115A 100%	110A 35% 90A 60% 75A 100%	Duty Cycle, (10 min.40°C) according to EN 60974.1
	IP 23 S				Protection class
	16,0 Kg				Weight
	207x500x411H				Dimensions mm

WIN TIG DC 220 M is a single-phase inverter power source also suitable for MMA/-SMAW use, with the exception of AWS6010 cellulosic electrodes; designed on purpose for maintenance work and small production batches.
The new LCD colour display makes use easy and intuitive.
The welding machine shows, in addition to the most known welding processes, several news, such as:

- TIG APC (Active Power Control) welding process that allows to obtain colder welding beads

- High quality arc ignition “EVO ST” in order to optimize the edges junction.

- Spot and intermittence function

- Pulsed arc on low, medium, high and very high frequency for interventions on small thickness where the transferred heat must be minimal

In TIG mode, the arc is started either on high frequency or by contact through the Cebora lift-system.
The power source is set up for remote control using the foot control (art. 193), remote control (art.187+1192) or Up-Down control on the torch (art. 1262).
The protection gases to be used are argon, argon/helium, argon/hydrogen.
It is also possible to memorize up to 9 welding programs (JOB).
The compliance with EN 61000-3-12 ensures a significant reduction in energy consumption and a wide supply voltage tolerance (+ 15% / -20%).
The power source can be powered by motor-generators of adequate power (Min. 10 KVA)

Dokumentacija:

https://www.cebora.it/art_553_presentazione_prod_uk.html

 INVERTER MULTIVOLTAGE MMA AND PULSE DC TIG WELDING POWER SOURCE. HF IGNITION.

Art.	557				Specifications
	TIG		MMA
	208-220-230V  50/60 Hz ±10%	400-440V  50/60 Hz ±10%	208-220-230V  50/60 Hz ±10%	400-440V  50/60 Hz ±10%	Three phase input
	16 A	16 A	20 A	16 A	Fuse rating (slow blow)
	7,8 KVA 35% 6,4 KVA 60% 5,4 KVA 100%	9,6 KVA 40% 7,8 KVA 60% 6,6 KVA 100%	9,3 KVA 35% 7,3 KVA 60% 6,4 KVA 100%	11,5 KVA 40% 9,3 KVA 60% 7,8 KVA 100%	Input power
	5A ÷ 280A	5A ÷ 350A	10A ÷ 240A	10A ÷ 280A	Current adjustment range
	280A 35% 245A 60% 220A 100%	350A 40% 280A 60% 250A 100%	240A 35% 200A 60% 180A 100%	280A 40% 240A 60% 210A 100%	Duty Cycle, (10 min.40°C) according to EN 60974.1
	IP 23 S				Protection class
	78 Kg				Weight
	705x1060x975H				Dimensions mm

WIN TIG DC 350 T (art. 557) is a three-phase inverter multi-voltage power source - 350 A 40% - 250 A 100% - for TIG and MMA/-SMAW use, with the exception of AWS6010 cellulosic electrodes.

Comes with cooling unit and trolley for transportation of the power source.

The new LCD colour display makes its use easy, quick and intuitive.

This new power source, in addition to the most common welding processes, is fitted with new ones, such as:

- TIG APC (Active Power Control), a welding process that allows to obtain colder welding beads 

- High quality arc ignition “EVO ST” in order to optimize the edge junction

- Spot and intermittence function

- Pulsed arc on low, medium, high and very high frequency for welding on small thickness where the transferred heat must be minimal

In TIG mode, the arc is started either on high frequency or by contact through the Cebora lift-system or EVO LIFT.

The power source is set up for remote control using the foot control (art. 193), remote control (art.187+1192) or Up-Down control on the torch (art. 1258).

The protection gases to be used are argon, argon/helium, argon/hydrogen.

It is also possible to memorize up to 9 welding programs (JOB).

The compliance with EN 61000-3-12 ensures a significant reduction in energy consumption and a wide supply voltage tolerance (+/- 10%).

The power source can be powered by motor-generators of adequate power.

Dokumentacija:

https://www.cebora.it/art_557_presentazione_prod_uk.html