Za dodatna pitanja i ostalu ponudu polovnih ili novih aparata za zavarivanje molimo Vas da nas kontaktirate.

Ukoliko i Vi imate rabljeni aparat za zavarivanje ili rezanje i želite ga prodati ili servisirati slobodno nas kontaktirajte. Možda Vam možemo pomoći

email: This email address is being protected from spambots. You need JavaScript enabled to view it.     01/6578210

SYNERGIC INVERTER MULTIPROCESS POWER SOURCE FOR MIG/MAG, TIG AND MMA WELDING.

KINGSTAR 400 TS is a high performance multiprocess power source, particularly suitable for high production applications.

The duty cycle has been increased to 340A @ 100% and 400A@ 40%

Art.	372		Specifications
	MIG - TIG	MMA
	400V 50/60 Hz +15% / -20%		Three phase input
	20 A		Fuse rating (slow blow)
	18,8 KVA  40% 16,4 KVA  60% 14,2 KVA 100%	17,7 KVA  40% 15,8 KVA  60% 15,3 KVA 100%	Input power
	10A ÷ 400A		Min.-max. current that can be obtained in welding
	400A 40% 370A 60% 340A 100%	380A 40% 350A 60% 330A 100%	Duty Cycle (10 min.40°C) According to IEC 60974.1
	Electronic		Stepless regulation
	0,8/0,9/1,0/1,2/1,6 Fe 0,8/0,9/1,0/1,2/1,6 Al 0,8/0,9/1,0/1,2/1,6 Inox 0,8/0,9/1,0/1,2 Cu-Si 3% 0,8/1,0/1,2/1,6 Cu-Al8 (AlBz8) 1,2/1,6 Cored		Wire size that can be used
	Ø 300 mm / 15 Kg		Max. wire spool size
	Ø 1,5 ÷ Ø 6		Electrodes that can be used
	IP 23 S		Protection class
	120 Kg		Weight
	588x1120x1380		Dimensions mm (WxLxH)

KINGSTAR 400 TS is a high performance multiprocess power source, particularly suitable for high production applications.

The duty cycle has been increased to 340A @ 100% and 400A@ 40% (according to IEC 60974.1);

Features:

- Devoted package of Welding Procedure Specifications (WPS) according to ISO 151612, which meets the qualification requirements of the procedures according to EN 1090-1;

- A Spatter Reduction System (SRS) welding process has been added to the HD (High Deposit) and to the ROOT (first pass) processes in order to achieve completely spatter free welds and with reduced heat input (on mild steel and stainless steel up to 3mm thickness);

- System calibration procedure, which allows, complete adjustment of all welding parameters and process variables, from the features of the welding torch, to the connecting cable used between the trolley and the power source;

- Easily removable power source cooling grille, to facilitate and reduce the maintenance time;

- Power source / wire feed connection with bayonet attachment in accordance with MIL-C-SS 116 standards that eliminates the problem of inserting and fixing the signal cable;

- Integration of the T-LINK system, which brings to zero the delay times for the dimming of the light reactive welding mask worn by the welder. Thanks to the wireless transmission of data between power source and mask, it guarantees maximum operator eye protection and reduces eye fatigue;

- The new hardware architecture of the power source allows the implementation of a web server, which through LAN connection and Wi-Fi connections, in addition to 2 USB ports, provides useful functions for remote service, diagnostics, information system, backup and data recovery etc, also for all those tasks that require data collection and processing;

- The User Interface can be remotely controlled and can be managed through Personal Computer, Tablet and Smart Phone without the need to install other dedicated software.

- New, compact, 4-rolls aluminum wire feeder with quick release and quick insertion rollers (diameter 37 mm), easily identifiable by type also thanks to a colour code system refering to the different diameter

- Compact and lightweight wire feed unit with two 7-segment display and user freindly operator controls. In addition to the MIG/MAG Euro torch connection, there is also a devoted connection for a standard TIG torch 

- Second gas connection and additional dedicated solenoid valve when using the power source in TIG process.

- Control panel positioned at the center of the machine, consisting of a 7” colour Touch Screen display with a simple encoder dial.

- Optional remote control panel (Art. 437).

Complies with EN 61000-3-12. 
Industry 4.0 compliant

Dokumentacija:

https://www.cebora.it/art_372_presentazione_prod_uk.html

https://welding.cebora.it/en/products/mig-mag/kingstar-400-ts

Cijena: 64.600,00 kn +PDV ali ako nas kontaktirate možemo odobriti i popust :) 

SET ZA ZAVARIVANJE HYUNDAI 6osni industrijski robot i FRONIUS aparat za zavarivanje

-HYUNDAI HA010L 6osni robot godina 2011 
-Nosivost 10kg
-Doseg 1986mm
-Kontroler Hi5
-Ekran u boji osjetljiv na dodir
-Aparat za zavarivanje FRONIUS TPS 450
-Max struja zavarivanja 450A
-PULSER
-Pištolj za zavarivanje vodom hlađen
-Ugrađen shock senzor

-Puštanje u radi i obuka uključeno u cijeni
-Pregled i testiranje opreme prije kupnje

Cijena 150.000,00kn

BROŠURA

MCU TIG -200 DC TOPTEHNIKA

Aparat za zavarivanje TIG DC postupkom

Max struja 200A
Struja kod 100%I iznosi 150 A
Oprema:gorionik 4m SR26, masa, reducir ventil

Cijena 3.550,00+PDV

***Datum objave 11.2.2021.***

MCU MIG-200X SYNERGIC TOPTEHNIKA

Aparat za zavarivanje MIG,MMA i TIG postupkom
Max struja 200A
Struja kod 100%I iznosi 150 A
Programi za FE, INOX, Al i mogučnost CuSi
Oprema:gorionik 4m, masa, reducir ventil

Cijena 4.880,00+PDV

***Datum objave 11.2.2021.***

MCU TIG-200 AC/DC TOPTEHNIKA

Aparat za zavarivanje TIG postupkom

Max struja 200A
Struja kod 100%I iznosi 150 A
Oprema: gorionik 4m SR26, masa, reducir ventil

Cijena 6.550,00+PDV

***Datum objave 11.2.2021.***

Aparat za zavarivanje TIG DC tip

SELCO GENESIS 282GSM
Priključni napon 400V AC 50 Hz

Oprema:
-gorionik NOVI 8 m dužine
-masa kabel
-jedinica za hlađenje WU21
-kolica

Cijena: 11.600,00+PDV

Nova cijena: 10.900,00+PDV

***Datum objave 9.3.2021.***

Aparat za zavarivanje tip FRONIUS TRANSTIG 2000 DC HF

Priključni napon 230VAC, 50Hz
Oprema:
-transportna kolica

-gorionik FRONIUS 8m

-masa kabel

Cijena:6.000,00+PDV

Nova cijena:5.400,00+PDV

***Datum objave 9.3.2021.***

Aparat za zavarivanje tip ESSETI macro 500 STICK

Priključni napon 400VAC 50 Hz, 380A 100%
Oprema:KABLOVI ZA ZAVARIVANJE

Cijena:8.000,00+PDV

Nova cijena:6.500,00+PDV

***Datum objave 9.3.2021.***

Aparat za zavarivanje tip KEMPOMIG 3500 KEMPPI

Priključni napon 400 V AC 50 Hz
Oprema:NOVI gorionik 360A 4m, masa kabel

Cijena:8.600,00+PDV

***Datum objave 4.8.2020.***

Aparat za zavarivanje  INVERTER  CROS-ARC  291C   MIG/MMA

Cros-Arc 291C Key features
Mig output 30 - 250  A
MMA output 25 - 200 A
Mig duty cycle @60%  250 amps
Stick duty cycle @60% 250 amps
Stick rod size          1.6-4.0mm
Napajanje               230v 1ph
Protection class        IP21
Fuse                    25A
Weight                  55kg
Oprema: masa kabel,
NOVI gorionik MIG MB250,
klješta s kablom za REL(MMA)

 
Cijena:4.500,00+PDV

Apara za zavarivanje tip SINCOSALD 260 DC HF

Priključni napon:400V 50 Hz
Max struja zavarivanja:260A
Oprema: uređaj, jedinica za hlađenje, kolica, TIG gorionik 4m  vodom hlađen, masa kabel

Cijena:8.000,00+PDV

***Datum objave 13.1.2020.***

Aparat za zavarivanje tip MAGIC WAVE 200  FRONIUS AC/DC Hf

Priključni napon:3*400V 50Hz
Max struja:200A
Oprema: uređaj, kolica, jedinica za vodeno hlađenje, TIG gorionik vodom hlađen, masa kabel

Cijena:9.000,00+PDV

***Datum objave 13.1.2020.***

Aparat za zavarivanje TIG  AC/DC  MAGIC WAVE  450   FRONIUS

Vodeno hlađenje gorionika
Oprema:TIG gorionik FRONIUS 4m, masa kabel

Cijena:13.000,00Kn+PDV

***Datum objave 7.1.2020.***

Aparat za zavarivanje Tig tip SINCOSALD 262 HF Dc PULSER

Priključni napon: 400V 50Hz
Pribor:gorinik 4m, masa kabel

Cijena:5.500,00 +PDV

***Datum objave 13.12.2019.***

Aparat za zavarivanje tip SINCOSALD SINVERT 262HF DC

Priključni napon: 400V AC
Tig DC
PULSER
Oprema:kolica, hladnjak, gorionik vodom hlađen, masa kabel

Cijena:7.500,00+PDV 

***Datum objave 10.12.2019.***

Aparat za zavarivanje tip TECNOSOL tip MIG TSC 5006  WP impulsni synergic

Pulsni sinergijski inverter aparat snage 500 ampera sa vodenim hlađenjem. Aparat u izvrsnom je radnom stanju, vrlo ocuvan iznutra i izvana.
Mogucnost zavarivanja MIG/MAG, pulse MIG/MAG, lift DC TIG postupkom kao i elektrodom. Pogodan je za zavarivanje gotovo svih vrsta materijala (inox, Al, crni celici, mesing, itd.)
Oprema: novi gorionik 500A, masa kabel

Cijena: 11.000,00Kn+PDV

***Datum objave 10.12.2019.***

Aparat za zavarivanje tip SELCO QUASAR 270RC

Aparat je namjenjen za zavarivanje svim vrstama oplaštenih elektroda.
Aparat ima funkcije HOT start, Arc forse, Celuloza weld, TIG lift.
Oprema: kablovi za zavarivanje

Voltage (50/60 Hz): 3x400V±15%
Maximum input power: 14.0 kVA
Maximum input current: 20.2A
Efficiency: 85%
Slow blow line fuse: 16A
Open circuit voltage: 70Vdc
IP protection rate: IP23S
Insulation class: H

Cijena:4.000,00Kn+PDV

***Datum objave 11.11.2019.***

Aparat za zavarivanje tip FRONIUS TPS 450

Oprema:novi gorionik tip MAXX500 vodom hlađen 4m dužine, Masa kabel

Cijena:16.000,00+PDV

***Datum objave 31.10.2019.***

Aparat za zavarivanje tip MIG 3602W PULSER  TECNOSOL/SOLWELDING

Priključni napon: 400V 50 Hz
Struja zavarivanja:   320A/ 50% I
240A/100% I

Oprema: Vodeno hlađenje gorionika
Odvojeni dodavač žice s duplim pogonom
Spojni set 5m dužine
Novi gorionik tip MAXX 500/4m
Masa kabel  5m

Cijena:14.000,00+PDV
***Datum objave 30.9.2019.***

Aparat za MIG/MAG, REL i TIG  zavarivanje tip FDB400 Italy

Priključni napon 3/400V
Max struja zavarivanja 400A/60%
Pokazivanje struje i napona preko displeja
Vodeno hlađenje
Novi pogonski motor
Novi gorionik 4m, 500A

Cijena: 7.000,00+Pdv

***Datum objave 2.9.2019.***

Aparat za zavarivanje  MIG 3000i ESAB ORIGO
Origo Mig C3000i, MA23A

Napajanje 3 faze, V/Hz 400-415 50/60 
Intermitencija 30%, A 300
Intermitencija 60%, A 240
Intermitencija 100%, A 200
Brzina žice m/mm 0.8-25
Žica Fe Ø 0.6-1.2
Žica Inox Ø  0.6-1.2
Žica Al Ø  1.0-1.2
Žica Punjena Ø  0.8-1.2
Napon praznog hoda, V   60
Težina 38kg
Oprema: Novi gorionik ERGO 360 4m, masa kabel

Cijena:8.500,00+PDV

Aparat za TIG zavarivanje tip FRONIUS TRANSTIG TT2000

Priključni napon: 230 V
Max struja zavarivanja: 180 A
Oprema:TIG gorionik 4m dužine, masa kabel

Cijena: 5.500,00+PDV

Uređaj za automatsko uzdužno zavarivanje

Promjer minimalni: 100 mm
Max.dužina zavarivanja: 1000 mm

Oprema:naprava + impulsni TIG DC uređaj, jedinica za hlađenje gorionika, strojni gorionik

Cijena: 40.000,00Kn +PDV

FRONIUS TransPulsSynergic 5000 polovni  

Raspon struje zavarivanja:
     MIG / MAG 3 – 500 A
     Štapna elektroda 10 – 500 A
     TIG 3 – 500 A
Struja zavarivanja pri
10 min / 40 °C 40 % 500 A
                      60 % 450 A
                      100 % 360 A
Oprema: novi gorionik odom hlađen MAXX 500
Masa kabel
Spojni kabel izvor – dodavač žice 8m

Cijena: 30.000,00+PDV

Nova cijena:26.000,00+PDV

***Datum objave 9.3.2021.***